Текущее время: 28 мар 2024 12:23

Часовой пояс: UTC + 3 часа




Начать новую тему Ответить на тему  [ Сообщений: 5 ] 
Автор Сообщение
 Заголовок сообщения: Excessive CPU use when scanning
СообщениеДобавлено: 08 ноя 2018 11:25 
Не в сети

Зарегистрирован:
08 ноя 2018 11:22
Сообщения: 6
I'm testing Nano at the moment and like it except for CPU use when scanning. When do a scan, CPU exceeds 90%, which slows down my computer and make my CPU run a lot hotter. Could you add the option to use low CPU when scanning? I have no interest in have scans complete quickly, I'm more interested in the scans not slowing down my computer at all.


Вернуться к началу
 Профиль  
 
 Заголовок сообщения: Re: Excessive CPU use when scanning
СообщениеДобавлено: 12 ноя 2018 18:58 
NanoAV Team
Не в сети

Зарегистрирован:
20 ноя 2015 12:38
Сообщения: 80
Hello, rogerm.

This is a normal behavior. During the scanning process, NANO Antivirus uses all accessible resources to provide high speed and quality of the scan. Otherwise, the scanning process can take many hours on some computers. You can try to change scanning settings to easier. For example, you can set up "minimum nesting level". With those settings, Antivirus will not scan archives, installers etc deeply. It can make speed faster and decrease the loading of a processor. But the dangerous and potentially dangerous objects inside archives can be not found.


Вернуться к началу
 Профиль  
 
 Заголовок сообщения: Re: Excessive CPU use when scanning
СообщениеДобавлено: 13 ноя 2018 11:50 
Не в сети

Зарегистрирован:
08 ноя 2018 11:22
Сообщения: 6
Disabling the scan of archives will not solve the problem. While the scanning time will be reduced, the CPU usage will still be high.

I think it would be good to have the option to do a scan using less resources, so that CPU is minimal, e.g. 25% or so. I do not care how long a scan takes, if it not slowing down my computer.


Вернуться к началу
 Профиль  
 
 Заголовок сообщения: Re: Excessive CPU use when scanning
СообщениеДобавлено: 14 ноя 2018 13:46 
NanoAV Team
Не в сети

Зарегистрирован:
20 ноя 2015 12:38
Сообщения: 80
Thank you for your interest in our program. The proposal was referred to the our developers. Perhaps it will be done but not in the immediate future.


Вернуться к началу
 Профиль  
 
 Заголовок сообщения: Re: Excessive CPU use when scanning
СообщениеДобавлено: 15 ноя 2018 09:26 
Не в сети

Зарегистрирован:
08 ноя 2018 11:22
Сообщения: 6
Thanks


Вернуться к началу
 Профиль  
 
Показать сообщения за:  Поле сортировки  
Начать новую тему Ответить на тему  [ Сообщений: 5 ] 

Часовой пояс: UTC + 3 часа


Кто сейчас на конференции

Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 1


Вы не можете начинать темы
Вы не можете отвечать на сообщения
Вы не можете редактировать свои сообщения
Вы не можете удалять свои сообщения
Вы не можете добавлять вложения

Найти:
Перейти:  
cron
POWERED_BY
Русская поддержка phpBB